OK
tit fleche-jaune CE standard
 
The CLEMENSON INDUSTRIE hinges are now subjected to the qualification proof tests of the CE standard.
The hinges of the SOUDAROC® Picardes and reinforced ranges have now obtained CE approval for the following specifications :
 
Reference
 Duty Endurance
test cycles

Weight of door subjected
to test (kg)

 Fire/smoke capacity Safety of persons Corrosion resistance Safety of property Hinge
grade
S.BB.080 severe (door)

200 000

 80 suitable yes no suitable 11
S.BB.0100 severe (door) 200 000 80 suitable yes no suitable 11
S.BB.120 severe (door) 200 000 80 suitable yes no suitable 11
S.BB.140 severe (door) 200.000 100 suitable yes no suitable 12
S.BB.160 severe (door) 200.000 160 suitable yes no suitable 14
S.BB.180 severe (door) 200.000 160 suitable yes no suitable 14
S.BB.200 severe (door) 200.000 160 suitable yes no suitable 14
P.140.060 D/G severe (door) 200.000 100 suitable yes no suitable 12
P.140.070 D/G severe (door) 200.000 100 suitable yes no suitable 12
P.160.070 D/G severe (door) 200.000 100 suitable yes no suitable 12
P.160.080 D/G severe (door) 200.000 100 suitable yes no suitable 12
P.190.070 D/G severe (door) 200.000 100 suitable yes no suitable 12
P.190.080 D/G severe (door) 200.000 100 suitable yes no suitable 12
P.GE.160.100 D/G severe (door) 200.000 100 suitable yes no suitable 12
P.GE.190.100 D/G severe (door) 200.000 100 suitable yes no suitable 12
P.GE.160.120 D/G severe (door) 200.000 100 suitable yes no suitable 12
R.NR.140.060 D/G heavy(porte) 200.000 80 suitable yes medium suitable 11
R.NR.140.070 D/G heavy (door) 200.000 80 suitable yes medium suitable 11
R.NR.140.090 D/G heavy (door) 200.000 80 suitable yes medium suitable 11
R.NR.160.070 D/G heavy (door) 200.000 80 suitable yes medium suitable 11
R.NR.190.070 D/G heavy (door) 200.000 80 suitable yes medium suitable 11
R.NR.190.080 D/G heavy (porte) 200.000 80 suitable yes medium suitable 11
CLEMENSON INDUSTRIE can now therefore offer you the most extensive range of hinges with CE marking.
In addition the picarde hinges benefit from the dual NF + CE marking thereby guaranteeing dimensional and dynamic performances.

NF or CE marking accreditation is subject to audits from the AFAQ-AFNOR. The quality approach implemented by CLEMENSON INDUSTRIE includes a quality management system in compliance with the ISO 9000 standards.

For the hinges that do not have the CE marking, you are advised to refer to the load table below :
STEEL PIN
ALLOWABLE LOAD
Pin diameter Min. knuckle diameter Brass washer
(kg)		 Thrust bearing
(kg)
5,5 10 30 -
6 10 30 -
7 13 35 65
9 16 40 70
10 20 45 80
11 20 65 110
12 20 75 110
14 23 95 120
Nota :
The correct operation of hinge also depends on its maintenance regular lubrication. For this purpose, all our models can be fitted with a lubrication. Channel or grease nipple on request.
CLEMENSON INDUSTRIE - BP 66 - F - 43120 Monistrol-sur-Loire - Phone : + 33 (0)4 71 66 53 26 - Fax : + 33 (0)4 71 66 55 44                                                            - legal notice -